Gravity Feed Slicers

800E Series

800E Series Spec Sheet

For operations with fewer slicing requirements such as convenience stores, independent restaurants or small delis, the 800E Series offers a choice of sizes and capacities for making everything from salads to sandwiches. While a daily use of one to three hours is the norm for these value-priced slicers, you can count on Berkel quality to see you through years of consistent performance.

• 1-speed, 1/4 HP, totally enclosed and permanently lubricated knife motor
  Furnished in 115/60/1, 2.5 amp, AC, ETL listed.

• Finish is stainless steel and sanitary, anodized aluminum; unit disassembles quickly without tools for easy cleaning

• 45° Product table on 827E model

• Precise slice adjustment to a thickness of 9/16” (14 mm)

• Built-in, top-mounted, two stone knife sharpener with dual-action system

• Permanent, tapered knife ring guard covers nonslicing portion of knife even when the sharpener and center plate are removed; ring guard design provides more room behind the knife for easy cleaning

800A Series

800A Series Spec Sheet

The compact design of the 800A Series economy slicers make them a good choice for operations with limited kitchen space. The 825A features a 10" knife and is suitable for lower-volume needs of operations typically requiring two to three hours daily use and occasional cheese slicing. The larger 827A features a 12" knife and more powerful 1/3 HP motor making it more adequate for larger amounts of meats, vegetables or fruits, as well as moderate amounts of cheese.3

• 1-speed, 1/4 HP (825A), 1/3 HP (827A), totally enclosed and permanently lubricated knife motor

• Finish is stainless steel and sanitary, anodized aluminum

• Disassembles quickly without tools for easy cleaning

• 45° Product table

• Precise slice adjustment to a thickness of 9/16” (14 mm)

• Built-in, top-mounted, two stone knife sharpener with dual-action system

829A/839A

When your needs don’t require a 900 Series slicer, but volume extends beyond the economy models, this series fits the bill. With their large product tables and 14" knives, as well as the spacious receiving platter, they can handle most foods, including oversized products. They’re well-suited to your convenience operation, large deli or catering operation, or small supermarket chain. Choose the 829A Manual Gravity Feed Slicer or the 839A Automatic Gravity Feed Slicer with 1-speed, automatic carriage.

• Finish is stainless steel and sanitary anodized aluminum

• 45° product table

• 1-Speed, 1/2 HP motor

• Nominal 14” (350 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife

• Built-in, non-removable, top-mounted, two stone knife sharpener with single lever, dual-action system

• Permanent, tapered knife ring guard covers non-slicing portion of knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning

900A Series

Along with their ability to handle heavy-duty volume and product requirements, the 900A Series Slicers offer standard safety features that meet the needs of the most demanding operations and are ideal for use by a staff with varying levels of experience. Choose from two manual gravity feed slicers, the 909A or 909AS with a built-in, digital scale that lets you slice and weigh to order or the 919A Automatic Gravity Feed Slicer with 2-speed, automatic carriage.

• Finish is stainless steel and sanitary burnished aluminum

• Nominal 12-1/2” (318 mm) diameter, hollow ground, hardened and polished forged stainless steel knife

• Built-in, removable, top-mounted, two stone knife sharpener with single lever, dual-action system

• Permanent, tapered knife ring guard covers non-slicing portion of knife even when the sharpener and center plate are removed

• Center plate interlock prevents the slicer from running when center plate is removed

• No-Volt release prevents activation of the slicer in the event of power interruption; operator must restart the slicer

900E Series

These heavy-duty workhorses take on foodservice and food retail demands with ease and durability. They make quick work of cheeses, meats, vegetables and more. Choose the 909E Manual Gravity Feed Slicer or the 919E Automatic Gravity Feed Slicer with 1-speed, automatic carriage.

• 1-speed, 1/2 HP, totally enclosed and permanently lubricated knife motor, thermally protected

• Furnished in 115/60/1, 4.5 amp, AC, ETL listed; also available in 1/3 HP, 220/60/1, 2.4 amp, AC, ETL listed

• Finish is stainless steel and sanitary burnished aluminum; unit disassembles quickly without tools for easy cleaning

• Nominal 12-1/2” (318 mm) diameter, hollow ground, hardened and polished forged stainless steel knife

• The carriage handles food up to 11” (280 mm) wide, by 6” (152 mm) high or 8” (203 mm) diameter

• Precise slice adjustment to a thickness of 27/32” (21 mm)

• Ergonomic style handle for ease of use